Pneumatic clutch is a device that can turn another object that was originally terminated by gently pressing one rotating object. Pneumatic clutch is widely used in mechanical equipment, metallurgical industry, food, packaging and printing and other fields. Let's have a detailed grasp with the clutch manufacturer:

　　1. It can run continuously and work at high frequency.

　　2. The equipment has a round wheel with a radiator with very large thermal conductivity, so it has a very good practical effect of heat removal

　　3. Torque control

　　The range of braking is relatively wide, and the torque can be adjusted.

　　4. The application of non asbestos friction plate and no electrical equipment, so the pneumatic clutch has excellent wear resistance, temperature resistance and high pneumatic safety factor.

　　5. The speed ratio of the pneumatic clutch pressure plate is fast, which can run smoothly and has good working characteristics.

　　6. The pneumatic clutch has the advantages of simple structure, simple maintenance and long service time.

　　Main uses: pneumatic two-way clutch is widely used to closely connect and separate the main and driven shafts of various organizations in the machinery manufacturing industry, such as decorative building materials, laminated glass, porcelain, mechanical equipment, exploration, power generation, ships, casting CNC lathes, etc., and has the effect of overvoltage protection for machinery and equipment.

　　The application of pneumatic two-way clutch for machinery and equipment started with large load can prevent the harm of large electric flow caused by the load start of main motor to the power network and avoid the damage of power transformation and distribution machinery and equipment. One 2-0.1/6 air compressor can be used for three clutches, and each clutch can be operated for a long distance in the centralized control system of the electrical equipment console.

　　Product structure:

　　1. The pneumatic two-way clutch is composed of lock cover, external rotating cover, winning and losing plate, internal spline shaft friction plate, air film, spring yellow, positive intermediate plate (torque 300N · m, no positive intermediate plate), internal clutch pressure plate, locating pin, bearing with seat, rolling bearing cover and pulley.

　　2. The pneumatic two-way clutch is reasonably configured, with few parts and light weight. It is very convenient for installation and maintenance. It can fully automatically compensate the worn gap in the whole process of application.

　　3. The fusion and separation of pneumatic two-way clutch. When the relay switching power supply is connected, the compressed air enters the sealing chamber according to the air guide faucet, and the shaft cohesion is caused by the air film or piston rod to push the winning and losing plate, friction plate and middle plate. The friction plate is clamped and fused with the pressure plate of the inner clutch. When the standard air pressure rises gradually, the soft start of the machine during operation can achieve stable operation. When the switch power of the relay is turned off, the standard air pressure subsides, and the friction plate can be separated by snap yellow rapid calibration.